- International Fees
International fees are typically 3.12 times the domestic tuition. Exact cost will be calculated upon completion of registration.
Course Overview
This course combines knowledge of ship's principal structural members, strength, and the use of the ship's stability information booklet to calculate the vessel's stability condition in order to maintain seaworthiness. The course also includes knowledge and application of the computer software used to calculate stability and hull stresses (bending moments and shearing forces) on modern ships.
Prerequisite(s)
- No prerequisites are required for this course.
Credits
18.0
Domestic fees
$1,408.01
Learning Outcomes
Upon successful completion of this course, the student will be able to:
- Explain the purpose of load lines.
- Calculate displacement of a ship at various drafts.
- Calculate metacentric height (GM).
- Differentiate between stiff and tender ships.
- Determine new drafts after loading, discharging, and shifting weights on board.
- Calculate the effect of free surface and apply it to find the fluid GM.
- Define angle of loll and dangers associated with it.
- Calculate the angle of list from loading, discharging, or shifting weights.
- Calculate the increase in draft due to heel.
- Calculate true mean draft.
- Explain the effect of wind and water on deck.
- Explain the damage stability criteria for different types of ships.
- Calculate draft and trim of a vessel from loading, discharging, or shifting weights.
- Calculate final drafts and trim using ship's stability data book for a typical vessel.
- Determine ship's stability using computer software.
- Determine bending moments and shearing forces using computer-based software.
- Calculate water pressure at any depth below the liquid surface.
- Draw a statistical stability curve for ship's loading condition using KN curves and GZ (righting lever) cross curves.
- Calculate area under the GZ curve using Simpson's rules to determine ship's compliance with load line rules.
- Identify ship's structural components on plans and drawings.
- Sketch and describe various structural members on a vessel.
- Describe and sketch construction of weather deck mechanical steel hatch covers with its securing arrangement.
- Draw a balanced, semi-balanced, and un-balanced rudder.
- Compare fixed pitch and variable pitch propellers.
- Distinguish between Type A and Type B ships for the computation of freeboard.
Effective as of Fall 2009
Related Programs
SCS 4 - Ship Construction and Stability 4 (NAUT 1864) is offered as a part of the following programs:
- Indicates programs accepting international students.
- Indicates programs with a co-op option.
School of Transportation
- Master 3000GT Domestic
Certificate Part-time
- Watchkeeping Mate Near Coastal (WKMNC)
Certificate Part-time
Course Offerings
Fall 2024
Below is one offering of NAUT 1864 for the Fall 2024 term.
CRN 51227
Dates
Mon Sep 09 - Fri Nov 08
- 9 weeks
- CRN 51227
- Domestic fees $1408.01
Status
Cancelled
This course offering has been cancelled. Please check back next term or subscribe to receive email updates.
Class meeting times
| Dates | Days | Times | Locations |
|---|---|---|---|
| Sep 09 - Nov 08 | Mon - Fri | 08:30 - 16:00 | Aerospace Technology ATC |
Instructor
Philip D'Sa
Course outline
Important information
- International fees are typically 3.12 times the domestic tuition. Exact cost will be calculated upon completion of registration.
- IMPORTANT NOTE: COURSE WILL BE HELD AT THE AEROSPACE CAMPUS IN RICHMOND IN ROOM 281. Student manual and workbook will be provided in class. Required Equipment: Non-scientific programmable calculator and safety boots for a field trip. Note: For the issuance of Transport Canada Training certificates by the school, a Transport Canada, Candidate Document Number (CDN#) will be required. Contact Transport Canada, Marine Safety for further information.Contact Transport Canada, Marine Safety for further information.
Programs and courses are subject to change without notice.